Supplies:

2 1/2" x 2 1/2"Foamie – for frame

3" x 4" Cocoa Foamie for Bear #3004 1092

1" x 2" Foamie for hat/beret

1/2" x 1/2" Black Foamie for nose #7761 3620

2 – 7mm Moving Eyes #7766 0837

Black Fine tip Marker #91029

3/4" Button Magnet 37762 2688

Low temp Glue & glue sticks

Directions:

Trace and cut out pieces from foamie according to the patterns. Be sure to cut out the center of the

frame as indicated.

Place the two moving eyes in the middle of the bear’s head and glue in place. Place the black nose below

the eyes and glue in place. Place the beret on the top of the head as in the picture and glue in place.

Use the fine tip marker to draw in a smile on the bear’s face and a button on the top of the beret.

Place the bear inside of the frame with the head on the outside and the body behind the frame as in

the sample pictured. Spot glue bear to frame. Wrap the paws around to the front of the frame and

glue in place.

Use the marker to write on the frame “My Masterpiece!” or as desired. Glue a button magnet behind

the bear’s body.

© 2005 Ben Franklin Crafts, Inc.