Choco Bunny
Supplies
Brown Hearty Clay #3001 6915
White Hearty Clay #3000 6454
Sky Blue Hearty Clay #3003 0923
Red Hearty Clay #37785 6005
Tacky Glue #7760 9875
Hearty Clay Color Scale Tool #7785 6054
Hearty Clay Scissors #7794 2722
Ruler
Pin backs or magnets
Low temp Glue gun & Glue sticks
Directions
Measure out 2 “I” balls of brown Hearty Clay. Roll balls together and form a block about 1” x 1.5” in size. Round one end of the block out and taper the other end forming a large teardrop. Use the Hearty Clay Scissors and make a snip down the center of the tapered end and split the two sides apart to form the ears. Smooth the edges of the ears. Set aside.
Measure out an “E” ball of red Hearty Clay and an “I” ball of white Hearty Clay. Mix to form pink clay. Measure out an “F” ball of the pink clay. Roll the clay into a thin log about 7” long. Lay the thin pink clay along the shape of the ears, forming a pink “icing” outline. Cut off excess clay as necessary.
Measure out an “F” ball of white Hearty Clay. Roll into a thin log about 8” long. Lay 3 short pieces of the white done on the face for whiskers. Lay done more for a smiling mouth below the whiskers. Trim off excess clay as necessary. Roll out an “A” ball of pink clay. Use half to shape into a nose and place on the center of the whiskers.
Roll out 2 “A” balls of white Hearty Clay for the eyes. Roll out an “A” ball of sky blue Hearty Clay. Divide blue in half, then in half again to get quarters. Roll one quarter blue into a ball for each eye. Place onto the whites of the eyes. Place eyes on the face above the whiskers and nose. Let bunny dry.
Glue a magnet or pin back behind bunny’s head.
