Supplies

White Hearty Clay #30006454

Wilton Candy Mold – Lil’ Bunnies #30010298

White Acrylic Paint #77624882

Black Acrylic Paint #77624890

Pink Acrylic Paint #77626507

1 1” Pinback #77403337 gold, #77126987 silver

Baby Powder Paper Towels

Tools:

Thin Paintbrush

Sharp scissors

Low Temp Glue Gun & glue sticks

Directions

Sprinkle the candy mold with baby powder. Tap mold to even out powder coating. Roll Hearty Clay into a small ball and press into the desired mold. Carefully remove molded clay from the mold. The baby powder should act as a release agent.

Smooth out the edges and surface of the molded clay. Adjust the shape if necessary, it may have gotten a little distorted when it was removed from the mold.

Place on a paper towel and let the clay shapes dry thoroughly. Use a sharp scissors to trim off excess clay around the edges if necessary.

Use the fine tip paintbrush to paint the details of the bunny. Use the white paint on the muzzles. Use the pink for the nose and inner ears.

Use the end of the paintbrush to make dip dots of white paint on the eyes. Let dry. Use the black paint to dip dot onto the white eyes.

Glue pinback behind the bunny.