Supplies
1 qty. 2 1/2” x 3” Shrink Film – White #30003144
1 qty. Bow Pin #30087527 Black Sharpie Marker #91029
1 qty. Silver jump ring
Colored Pencils
Sand paper #23006271
Heat It Tool by Ranger #30003773
1/8” Hole Punch #77178541
Sharp scissors
Jewelry pliers

Optional:
Sparkle Glaze #77855908 or
Clear Acrylic Sealer Gloss #77628073 or
Satin #77628081 Foam Brush #10109

Pattern

Directions

Lightly sand the shrink film plastic. Wipe off excess dust. Place the film over the image and trace with the black Sharpie marker. Color in details of the image with colored pencils. Carefully cut out the design from the shrink film, leaving a small border around the outline. Use the 1/8” hole punch and make a hole at the center top of the piece. Follow the shrink film manufacturer’s instructions and use the Heat It tool to shrink the piece. Let cool. Optional – you can brush on a coating of Sparkle Glaze or clear sealer if you want. Let dry. Slip a jump ring through the hole. Attach the jump ring to the bow pin.