Supplies:

Cone shape Glass bead #3005 4895 (Da Beads Brown #5)

14mm White Pearl #3000 0843

4mm Facet Bead – Red #3000 6128

3" Head Pin #3000 5839

Scribbles Paint – Hot Chocolate #7752 7788

Scribbles Paint – Butterscotch #7752 7903

Scribbles Paint – Very Berry Red #7752 7812

Phone Strap – Pink #3004 5818

Round Nose Pliers #3002 4250

Chain Nose Pliers #3002 4247

Flush Cutters #3002 4251

Jumbo Paper Clip or similar

Optional: 12mm White Pearl #3000 0842

Note: Knowledge of wire wrapping terminology and skills is helpful for this project

Directions:

Preparing your ice cream:

Take the paper clip and unbend the wire to create a stand to hold a bead as shown. Place a 14mm

white pearl onto the wire. Take one of the scribbles paints, depending on your favorite “flavor” and

squeeze paint along the top of the pearl to look like a “topping” Let the paint dry.

To assemble ice cream cone:

Take a 3” head pin and slide the brown cone shaped glass bead on with the pointed side down.

Next place your 14mm white pearl bead covered with the “topping”. This is your “scoop of ice cream”.

Next slide on a 4mm red facet bead for the “cherry on top”.

Keep the beads closely together on the head pin. Take the round nose pliers and make a wire wrap

loop above the red facet bead with the remaining length of wire on the head pin. Wrap wire so that

the beads do not slide around on the head pin. Cut off the excess wire. Slide the loop through the

split ring on the phone strap and attach to your cell phone, bag, etc.