Supplies

Beadalon Quick Links Jewelry shaped rings – your choice of quantity and designs

Quick Links Connectors

Jewelry Clasp of your choice

Optional:

Beading wire- silver , 24 gauge #30085108 or 22 gauge #30085107

Beads

Tools:

Chain Nose Jewelry Pliers #30056199

Round Nose Jewelry Pliers #30056203

Flush Wire Jewelry cutters #30056206

Optional: Jewelry Design Board #30022579

NOTE: If adding beads, wire wrapping knowledge is needed.

Directions

After choosing your Quick Links shapes, lay them out into a pattern that you would want to connect together.

If you want to place beads in between, you will need to wire wrap the beads to create it’s a link with a looped ends.

After you are happy with your design, begin to attach the links together using the Quick Links connectors. Catch one end of the connector onto the link. Press the connector closed using a chain nose pliers or pinch bail pliers. Catch the other end of the connector to another link or wire wrapped bead link. Press the connector closed. Repeat steps until you have all of your pieces connected. Lastly attach the clasps to the ends of your piece.

For design ideas using Quick Links go to www.beadalon.com