Small Reindeer

Supplies:

8 ea. - Gold Jingle Bells 6mm 77662411

1 ea. - Red Felt 77676619

1 ea. - Red Pom Pom 7mm 30007018

2 ea. - E-Beads-Black 77185884

2 pcs. - Red Icy Twig Pick or Berry Spray

2 ea. - Styrofoam Cone 2” x 3” 77492553

1 ea. - Styrofoam Ball 1” 77603258

10-in of 1/8” Red Satin Ribbon 77801340

Acrylic Paint Burnt Sienna 77624951

Craft Picks 77676445

Tacky Glue 77609875

Wire Cutter 77819151

Scissors

Serrated Knife

Paintbrush

Instructions:

Cut a 1/2” off the tip of one Styrofoam cone.

Cut 3/4” off the tip and 1-1/4” off the base of

the second Styrofoam cone, this will be the muzzle.

Using the serrated knife to cut the 1” Styrofoam

ball in half. Cut the half-ball into quarter piece for

reindeer ears. Shaping the Styrofoam pieces with

fingers if needed.

Paint both styrofoam cones and ears with acrylic

paint. Let dry.

Cut 2 craft sticks in half. Dip the craft stick into

tacky glue and insert into the base of muzzle;

insert the other end into front of the body.

Dip one craft stick into tacky glue and insert into

one end of ear; insert the other end into the top,

side of body. Repeat for other ear. Glue pom pom

nose to front of muzzle. Glue eyes to top of muzzle.

Cut felt into a 1/4” x 7-1/4” piece. Glue felt piece

around bottom of body. Glue 7 jingle bells to felt

piece.

Make a double bow out of red ribbon. Glue to the

underside of muzzle. Glue one jingle bell to middle

of bow.

Using the wire cutters, cut off two pieces of the

icy twig pick. Glue to top of body for antlers.

Large Reindeer

Supplies:

8 ea - Gold Jingle Bells10mm 77662544

1 ea. – Red Felt 77676619

1 ea. - Red Pom Pom7mm 30007018

2 ea. - Black Round Bead 6mm 30000964

14-in of 1/8” Red Satin Ribbon

2 pcs - Red Icy Twig Pick or Berry Picks

2” x 3” Styrofoam Cone 77492553

3” x 6” Styrofoam Cone 77603423

1-1/2” Styrofoam Ball 77603274

Acrylic Paint-Burnt Sienna 77624951

Craft Picks 77676445

Tacky Glue 77609875

Wire Cutter 77819151

Scissors

Serrated Knife

Paintbrush

Instructions:

Cut a 1/2” off the tip of one Styrofoam cone.

Cut 1-1/4” off the tip and 1/2” off the base of

the 2nd Styrofoam cone, this will be the muzzle.

Using the serrated knife to cut the 1-1/2” Styrofoam ball in half. Cut the half-ball into quarter piece for reindeer ears, shaping with fingers if needed.

Paint both styrofoam cones and ears with acrylic paint.

Let dry.

Cut 2 craft sticks in half. Dip the craft stick into tacky glue and insert into base of muzzle; insert the other end into front of body.

Dip one craft stick into tacky glue and insert into one

end of ear; insert the other end into the top, side of body. Repeat for other ear.

Glue pom pom nose to front of muzzle. Glue eyes to top of muzzle.

Cut felt into a 1/2” x 10” piece. Glue felt piece around bottom of body. Glue 7 jingle bells to felt piece.

Make a double bow out of red ribbon. Glue to the underside of muzzle. Glue one jingle bell to middle of bow.

Using the wire cutters, cut off two pieces of the icy twig pick. Glue to top of body for antlers.