Supplies

1 qty. Wood Clothespin #77676569

1 qty. 6mm Red Facet Bead 330006145

2 qty. 7mm Moving eyes #30055155

1” x 2” Cocoa Foamie #30041092

4” of ribbon for bow Brown Acrylic Paint

1 qty. 1” pin back #77403337 or #77126987

Tools:

1” Foam brush #10109

pen/pencil scissors

Low temp Glue Gun #77536417 & Glue Sticks #77534479

Pattern

Directions

Take the wood clothespin and turn it upside down so that the “clip” area is above. This will be the antlers. Paint the bottom and sides of the clothespin with the brown acrylic paint, as shown in the sample. Let dry.

Trace and cut out the ears from the cocoa foamie according to the patterns. Glue the ears just below the antlers. Place the two moving eyes below and glue in place.

Place the red facet bead on the lower round part of the head for the nose, glue in place.

Tie a bow with the ribbon and glue below the neck. Glue the pin back behind the reindeer.