Supplies

Rose Gold sm. Ball Hook wire 8-pc. #30104218
Rose Gold 25mm Eye Pin 12-pc. #30104216
Rose Gold Chandelier 1 #3104184
Rose Gold 25mm Head Pin 12-pc. #30104215
Crystazzi® – Oval 6mm Rosaline #30095038
Crystazzi® – Round 4mm Crystal AB #30095078

Tools:
Round Nose Pliers
Chain Nose Pliers
Wire Cutter
 

Directions

Take a ball end head pin and slip on a 4mm crystal round and then a 6mm Rosaline oval bead. Using your round nose pliers, make a loop with the remainder of the head pin. Using your chain nose pliers, open up the loop you created and attach the head pin to one of the rings on the bottom of the chandelier finding.
Repeat these steps to fill up the rest of the bottom of the chandelier findings.
Take an eye pin and slip on a 4mm crystal round bead. Use your wire cutter to trim down the end of the eye pin so that you have about ½ inch of eye pin from the 4mm round bead. Using your round nose pliers, make a loop with the remainder of the eye pin but your loop must face counter to the original loop of the eye pin so that the chandelier finding faces. Using your chain nose pliers, open one end of the link you just created and attach it to the top of the chandelier finding. Open the other end of the link and attach to the loop of the ear hook.
Repeat for the other earring.