Supplies
1 qty. 2” x 3” White Foamie #77613612
1 qty. 1” x 1” Black Foamie #77613620
1 qty. 1” x 2” Red Foamie #77613604
1 qty. ½” x ½” Pink Foamie #77613596
2 qty. 7mm Moving eyes #30055155
1 qty. 1” pin back - gold #77403337 or silver #77126987

Tools:
Pencil for tracing
Sharp Scissors
¼” Heart Punch #77178632
1/8” Hole Punch #77178541
¼” Hole Punch #77178558
Low Temp Glue Gun & Glue Sticks

Diagram 1

Directions

Trace and cut out pieces from foamies according to the patterns.
 

Glue the snowman’s head to the body, slightly overlapping the pieces.

Place the two moving eyes on the center of the head and glue in place. Punch out 5 circles from the black foamie using the 1/8” hole punch. Arrange the pieces to form the smiling mouth. Punch out two hearts from the pink foamie with the ¼” heart punch. Place a heart at each end of the smile. Glue all in place.

Use the ¼” hole punch to punch out 2 circles from the black foamie. Place on the body below the neck for the “buttons” and glue in place. Lastly, place a red foamie mitten on either side of the body and glue in place. Glue the pin back behind the body.