|
Directions
Take
a moment to review all instructions on product packaging before
beginning this project.
Notes:
PermEnamel, the only air-dry paint that does not require heat setting,
is a polyester-based and DOES NOT mix with water. PermEnamel
is not intended for use on surface with food contact. You may clean your
brushes with soap and water between applications, but make certain they
are completely dry before moving to the next color.
Surface
preparation is very important. Clean plate and mug with soapy water.
Rinse and dry thoroughly. Apply PermEnamel Surface Conditioner with a
clean, dry brush. Let dry. Do not rinse or wipe off.
Apply
Adhesive to the back of the stencil. Position stencil on the plate.
Pour
a puddle of Cotton Candy Pink on the paper plate. Dip the sponge in the
paint and pat off excess. Using an up and down pouncing motion stencil
the words and hearts on the plate. Carefully remove the stencil.
Reposition the stencil and continue stenciling around the plate.
Position
the stencil on the mug. Stencil the design in Cotton Candy Pink.
Cut
the compressed sponge in a ˝" square. Wet the sponge and ring out
the excess. Dip the square into Red Red. Stamp checks around the base of
the mug.
Using
the Stencil and Stamp Sponge paint the handle of the mug Red Red.
Allow
the paint to dry for 10 days before washing.
printer-friendly
version
Back Home
Search Category
Search Name |